on: September 25, 2013, 08:41:24 pm
As our bullets are now aging, I would like to remind everyone about the pin that holds the decompressor valve from falling into the cylinder. Remember Bug Catchers post on it? I recently changed mine as it was about one third gone. It's easily done by holding down the spring with one hand and following out the old one with a new one. Not having the right pin, I had a cotter pin of the right size and will keep an eye on it until I find or make the right pin. But you can still use that method to check its condition and put it right back in. Just a heads up, on what i think could be a major disaster if left unloved. Cheers..
« Last Edit: November 15, 2013, 01:19:58 am by cyrusb »
Logged
2005E Fixed and or Replaced: ignition, fenders,chainguard,wires,carb,headlight,seat,tailight,sprockets,chain,shock springs,fork springs, exhaust system, horn,shifter,clutch arm, trafficators,crankcase vent.