Hey everyone! Getting ready to take on my next project! It looks like I very well may be picking up a '59 RE Chief, I just need to tie up the loose ends and make it happen. As some of you know I am out to build a high HP vintage drag bike. Most of you think I'm insane, but I'm all about having fun, going fast and building 1 of a kind rides. My plans for this build are to build a bad ass, super fast RE twin that hasn't been done before.
I'M GOING TURBO!!! The hardest part of making this work is going to be installing fuel injection. My thoughts are to take an ECU and TB off of an wrecked UCE Bullet. Not only should I be able to bolt it right up, but I'd be able to keep it Enfield. Next concern. Tuning. I have to be able to have an ECU that I can interface with a laptop or programmer to create custom fuel maps. Boosting the motor I will need to be running about 20% richer than a NA motor, I need to be able to control that. Everything else should be cake work.
Ace, GHG, Scooter Bob and you other horse power junkies:
What are you're thoughts on availability of programming the RE ECU? Do you know of any other donor options for a TB and ECU that are programmable or more performance oriented? Or do you know of a carb that will handle boost without pushing the fuel out of the bowl? Thanks!
Scottie