[Hans]

Hi, I have a 2021 Classic 500. and I want to add a sidecar.
Now, to reduce the trail , I am thinking about fitting offset axle front forks.
Would that reduce the trail enough for sidecar use, or should you do something more drastic ?
I guess the best would be to have a set of Earles forks made up.
Not sure I want to go that far.
Maybe leading links ?
Look for stiffer springs, or dampers ?
Any ideas out there ?

Thanks,
Hans

[axman88]

It might be fairly straightforward to adapt a set of forks tube assemblies, or just the lower sections, from the pre-2012 C5, which have the axle offset forward.  I recall reading that this fork design was kept later still on Bullets and/or 350 machines.

https://www.ebay.com/itm/276346496791
https://www.ebay.com/itm/362965606614

I believe, at some point the method of mounting the tubes into the casquette changed to be alert.

One could also reduce wheel diameter to reduce trail.

[AzCal Retred]

Since you are buying a sidecar, what does the manufacturer suggest? They certainly have set-up guidelines. It's poor form to kill off your customers!   I'm betting this is a well travelled road. Try these folks, they are a known good supplier:
https://www.cyclesidecar.com/sidecars-for-motorcycles
You don't particularly want to become a test pilot for a low-budget "no-name" brand sidecar builder at our age. It's frustrating and we no longer "bounce"...

[zimmemr]

I'd mount and ride the sidecar before worrying about modifying the front fork. Over the years I've owned several rigs and built a few for others. In my experience, a light bike, with a light sidecar normally works just fine with stock geometry. I would recommend installing stiffer fork springs, wider handlebars and a steering damper, and of course lowering the gearing. You may also want to invest in stiffer rear springs.

FWIW my T140 Triumph with it's Watsonian Palma chair would positively smoke my buddy's BMW R60/2 Steib combination. But when another riding buddy bought a factory-built HD hack, he put us both on the trailer.