Members Rides


Members Rides

NField Gear

Welcome, Guest. Please login or register.
Did you miss your activation email?
May 25, 2016, 08:10:34 am

Login with username, password and session length


Author Topic: cutting down my exhaust.  (Read 294 times)


  • Grand Gearhead
  • *****
  • Posts: 1,090
  • Karma: 0
cutting down my exhaust.
« on: June 20, 2013, 09:25:06 pm »
Ive got a standard exhaust. It actually extends longer that the bike. Would it be cool to cut a few inches off this without affecting the performance? Should be sweet aye? Im talking bout the narrower section after the baffle at the end of the standard exhaust. wanna get my saber saw on that....


  • Grand Gearhead
  • *****
  • Posts: 1,157
  • Karma: 0
  • 2012 Royal Maroon C5 Special
Re: cutting down my exhaust.
« Reply #1 on: June 20, 2013, 09:58:13 pm »
It shouldn't cause any problem and would definitely look better, IMHO. I'd considered the same tack, but decided to go for a completely different silencer instead.
Rather than have a homeless person for the holidays, I decided to stick with ham.


  • Neophyte
  • *
  • Posts: 32
  • Karma: 0
  • 2010 Bullet C5; Teal
Re: cutting down my exhaust.
« Reply #2 on: June 20, 2013, 10:03:44 pm »
I opted for a hollow short bottle, with an aftermarket baffle (8" triangle hole) and about 3" of fiberglass to give it enough back pressure so the efi doesn't have a heart attack, and enough to give it a good thump on hard acceleration and just a murmur at idle... it's fun!
RIDE, ride, NOW! Ride!