HPRE

Menu

Members Rides

My Woodie


in
Members Rides

NField Gear

Welcome, Guest. Please login or register.
Did you miss your activation email?
September 01, 2015, 01:13:13 pm

Login with username, password and session length

 

Author Topic: Crankshaft Nut Removal  (Read 426 times)

High On Octane

  • Grand Gearhead
  • *****
  • Posts: 5,583
  • Karma: 0
  • Go Fast & Look Good Doing It
Crankshaft Nut Removal
« on: June 18, 2013, 05:33:35 pm »
My inner primary cover decided to break today.  I guess I should be happy it decided to break at my partners shop with all the tools.  Anyways, I've gotten everything removed except for the crankshaft nut and sprocket.  How do I go about removing it?  Thanks.

Scottie
Scottie J  ~  Bulldog Kustoms Denver  ~  1958 Enfield/Indian Trailblazer - The Blackhawk

ERC

  • Grand Gearhead
  • *****
  • Posts: 1,706
  • Karma: 0
Re: Crankshaft Nut Removal
« Reply #1 on: June 18, 2013, 07:41:29 pm »
Air wrench and big socket.  ERC
2-57 Apaches, 2-57 Trailblazers, 60 Chief, 65 Interceptor, 2004 Bullet, 612 Bullet chopped.

High On Octane

  • Grand Gearhead
  • *****
  • Posts: 5,583
  • Karma: 0
  • Go Fast & Look Good Doing It
Re: Crankshaft Nut Removal
« Reply #2 on: June 18, 2013, 08:39:07 pm »
ERC - Is it left or right handed thread?
Scottie J  ~  Bulldog Kustoms Denver  ~  1958 Enfield/Indian Trailblazer - The Blackhawk

ERC

  • Grand Gearhead
  • *****
  • Posts: 1,706
  • Karma: 0
Re: Crankshaft Nut Removal
« Reply #3 on: June 18, 2013, 09:21:52 pm »
Right hand and 52mm fits.  ERC
2-57 Apaches, 2-57 Trailblazers, 60 Chief, 65 Interceptor, 2004 Bullet, 612 Bullet chopped.

High On Octane

  • Grand Gearhead
  • *****
  • Posts: 5,583
  • Karma: 0
  • Go Fast & Look Good Doing It
Re: Crankshaft Nut Removal
« Reply #4 on: June 18, 2013, 09:36:46 pm »
Thanks!  You're the best!  Seriously, you always save the day when I'm in a bind with my bike.  I really appreciate all your help and advice.  BTW  I was looking at Hitchcocks for replacement covers and the only 1 they had listed had broke in the same spot and had been welded.  Is this common on these bikes?  Also can a guy weld this up with any welder with aluminum wire?  Thanks as always.  :)

Scottie
Scottie J  ~  Bulldog Kustoms Denver  ~  1958 Enfield/Indian Trailblazer - The Blackhawk

ERC

  • Grand Gearhead
  • *****
  • Posts: 1,706
  • Karma: 0
Re: Crankshaft Nut Removal
« Reply #5 on: June 19, 2013, 07:15:13 am »
Yea Scottie any good welder can repair it. ERC
2-57 Apaches, 2-57 Trailblazers, 60 Chief, 65 Interceptor, 2004 Bullet, 612 Bullet chopped.