2010 G5 -
I installed the tacho today, wired up correctly, self test functions ok, but the neutral light now doesn't light up and the starter wont turn. If I take the bulb out of the speedo and hold the metal side of the bulb holder against something metal, it grounds and lights up, and the bike will start - as long as I hold the bulb so that it grounds! With the light installed in the speedo, it fails to light, and the engine wont start. When I turn off the ignition, and only if the kill switch is ON, the neutral light flashes briefly and there is a click from under the seat. I've checked everything in the casquette - I guess something somewhere has been dislodged, but I can't find anything amiss, all the connectors are good, & no blown fuses. I even disconnected all the tacho wires and put everything back as it was, but same problem persists.
Any thoughts? I'm baffled by electrics, and I don't have any testing gear. Have I missed something obvious?
Thanks in hope & anticipation.....
Will