Adding to Ice's thoughts, the snail adjusters used to adjust the rear wheel are the same as those that were on the 1948 350cc Trials bike. Like them or not, they are a historic part of the motorcycles design. This Trials bike used the spring/shock mounted swing arm during a time that the other production motorcycles were either still building hardtails or using the vertical plunger rear suspension.The method of making the rear mounting bracket for these spring/shocks hasn't changed much since 1949 when several of the Royal Enfields with the shock mounted swing arm were put into production.Although Royal Enfield wasn't the first to sell motorcycles with this type of rear suspension the other companies that had used it were either out of business or had dropped the design. This newly designed suspension resulted in Royal Enfield definitely being the reason the other companies tried to get their versions of it into production to replace their obsolete designs.The headlight casquette on the current Royal Enfields with its twin parking light "eyes" is basically the same as those that were used on the 1954 Bullet, the 500 Twin and the Meteor.The new UCE engine is still using a built in separate oil tank built into the engine along with the dry sump just like the Royal Enfields have always used on their 4 stroke engines.The best part of it is there is nothing phony. They didn't have to "recreate" any of it because Royal Enfield has been using all of these old designs from the time they were first introduced.
R.E.'s sales in the US have grown while sales of other marques have continued to decline.
Total world wide exports >3,000. US imports >700.
~ I'll bet there are Bullets which have gone where no GS could go.......
Page created in 0.12 seconds with 36 queries.