So, the only issue i ran into was over torquing the leds on the back. i pulled the mounting bolt out of the plastic, i didnt even wrench that hard. so im going to glue those and use them as spares and ordered some new ones, which i will use loctite on. This will also give me a chance to fix my measurements- since the lights, though measured twice, are off (just slightly... but i notice).
I really really like the look, the rear blinkers now match the tail light (did LED replacement on that bulb too), and they look like they belong. I also like not looking down and seeing chrome signals on my forks! Simple is nice, less is more. I have amber lenses on the way for the pilots, will see how they look and post when they get here!