Members Rides

Red AVL Deluxe after Photoshop

Members Rides

NField Gear

31 Guests, 2 Users
iRideRoyalnVA, Arizoni
Welcome, Guest. Please login or register.
Did you miss your activation email?
May 27, 2016, 11:11:33 pm

Login with username, password and session length


Author Topic: wiring question  (Read 962 times)


  • Scooter
  • **
  • Posts: 94
  • Karma: 0
Re: wiring question
« Reply #15 on: March 01, 2015, 06:49:57 am »
This might help:


Note the headlamp bulb "earth" and that of the high beam warning light are NOT connected to the earth wires of the rest of the wiring loom, they feed straight back to the AC connection on the rotor.

However, as your wring has been butchered completely you MIGHT want to fit a proper 120W two-wire Lucas RM21 alternator instead of its under-powered Indian clone, and a nice simple 12V all DC wiring loom with a good single phase regulator/rectifier. You can get these with a built-in capacitor, eg the Boyer Power Box, for running without a battery and preserving the stripped-down look.



Thanks for pointing that out. I had missed that and would have hooked it up to the ground of the battery. I should be good now. Just have to make a wiring harness. Thanks!