Author Topic: torque on shock mounts  (Read 1099 times)

0 Members and 1 Guest are viewing this topic.

eggman65

  • Scooter
  • **
  • Posts: 39
  • Karma: 0
  • REV THAT THING!
on: March 13, 2013, 08:14:36 pm
Can anyone share what the torque should be on the rear shock mounts? I am speaking about the chromed acorn nuts (upper and lower). Bike is a C5 Classic. Thanks
« Last Edit: March 13, 2013, 08:22:49 pm by eggman65 »
2011 Ural Tourist (sidecar rig)
2010 Royal Enfield C5 Classic
2007 Kawasaki Ninja 250R
2003 Harley Davidson 883R
2002 Yamaha Vstar Classic
1985 Honda CMX250 Rebel
1984 Honda ATC 200s
1983 Kawasaki KZ440 LTD
1980 Honda CX500 Custom
1973 Honda CB450 k6 (café racer)


REdmonton

  • Bulleteer
  • ***
  • Posts: 136
  • Karma: 0
Reply #1 on: March 13, 2013, 09:13:55 pm
I believe it is 4.00 kg/m. I'm not sure what that is in imperial measurements.


Arizoni

  • Grand Gearhead
  • *****
  • Posts: 7,412
  • Karma: 2
  • "But it's a dry heat here in Arizona
Reply #2 on: March 13, 2013, 10:43:43 pm
29 lb/ft of torque or 4.00 kg/m torque.
Jim
2011 G5 Deluxe
1999 Miata 10th Anniversary


eggman65

  • Scooter
  • **
  • Posts: 39
  • Karma: 0
  • REV THAT THING!
Reply #3 on: March 13, 2013, 11:44:37 pm
Excellent; thanks for the help !
2011 Ural Tourist (sidecar rig)
2010 Royal Enfield C5 Classic
2007 Kawasaki Ninja 250R
2003 Harley Davidson 883R
2002 Yamaha Vstar Classic
1985 Honda CMX250 Rebel
1984 Honda ATC 200s
1983 Kawasaki KZ440 LTD
1980 Honda CX500 Custom
1973 Honda CB450 k6 (café racer)


Gypsyjon

  • Grease Monkey
  • ****
  • Posts: 454
  • Karma: 0
  • 201o G5 Deluxe Black & Chrome
Reply #4 on: March 14, 2013, 12:54:56 am
Put blue Loctite on too.