i appreciate all the help. i am 880 ft elevation. and now that i look at the header i do see a small amount of carbon on the pipe around the port. i was planning to wrap the pipe with fiberglass, add a heat fin, and replace the El cheap o muffler that is pitted with a new El cheap o muffler that will look good for a year or two. i think that how old the one on there is. so adding a heat fin will require pulling the pipe away anyway i may as well put it back right. so I'm all ears.
well, if any of you gearheads are still out there, i didn't jump ship and swim back to japan. i wanted to go ahead and those jets before i take it apart. i just got the parts from our friends here in the states but they sent the wrong main jet. but i did take care of that exhaust leak and wrapped the pipe with fiberglass. i didn't put the heat fin on because i thought i wouldn't be able to slide it down the pipe past the wrap to check for leaks. does any one think the wrap could cause the head to run hot? i mean the heat has to go somewhere. if the wrap keeps it from radiating from the pipe then the pipe itself will retain more and its inside the exhaust port.
Page created in 0.116 seconds with 36 queries.