Unfortunately, now I'm trying to figure out how to make riding with the screen enjoyable - it keeps me warm, but the helmet noise from the wind deflection is unbelievable. Can't ride above 25mph without ear plugs, and at 55mph I cannot, at all, hear my engine running. I have some suggestions from another thread...
Raise it. The gap at the bottom lets air in so you don't get a vacuum bubble behind the screen. This also smooths it out. It might look goofy but it will work better.
I knew there was something I forgot to add...I did try to raise it, after a fashion. Problem is, it won't go any higher. I can't move the handlebar clamps up any further without angling them out (rather than up) too far. I'm at the length limits of the two struts that hold the screen (see pic). I guess the next step in raising it would be to buy or fabricate some longer struts...Interesting. I wonder at what point increasing that gap in order to raise the top edge produces diminishing returns - too much wind beneath the screen. I don't see how I can find out without buying or fabricating new struts. Anyone ever try this? Are parts available?
Page created in 0.086 seconds with 36 queries.