Author Topic: Hub spacers  (Read 1164 times)

0 Members and 1 Guest are viewing this topic.

AgentX

  • Grand Gearhead
  • *****
  • Posts: 1,514
  • Karma: 0
on: January 29, 2013, 03:24:59 pm
I'm installing a current model disc fork on my old iron barrel.

What's the proper arrangement of spacers on the axle?

From Hitchcock's diagram, from driver's right side, it seems it's fork leg, speedo drive directly against the fork leg, cylindrical spacer between the speedo and the hub bearing, hub, stepped bushing, left fork leg.

Correct?


motomataya

  • Grease Monkey
  • ****
  • Posts: 371
  • Karma: 0
Reply #1 on: January 29, 2013, 04:32:50 pm
Correct.


AgentX

  • Grand Gearhead
  • *****
  • Posts: 1,514
  • Karma: 0
Reply #2 on: January 30, 2013, 12:29:56 am
Thanks!  There are, um, a variety of creative methods I've seen used here in India.