That's the one I bought. There's no way it would fit over the nipple. The OD of the duckbill hose is smaller than the OD of the nipple!The description has a note that seems true to the ES, in my case: "Can be adapted to the electric start bikes with a small piece of slightly larger diameter hose."
Tom, mine is a 2003. I'll upload a pic in a couple hours.Bare, the catch can would collect quite a bit of oil on my bike, so it definitely needs an outlet for it.
I can't clamp the hose to the hose because it'll just compress them both.
I don't see what the problem is. Maybe the paint is slightly thick around the nipple. You can take some sand paper or a file and shape that nipple a bit so the breather hose slips over a little easier. You do want a slightly tight fit. If you do file or sand plug the breather hole with something to keep any shavings or dust out of the breather nipple. What year is your bike? Is it an '03/'04? Where is it from? That doesn't look like a VIN # on the engine.
Mine is an '03, Indian market model. The nipple doesn't have excess paint, but it does have a weird set of barbs on it, which may be adding to the problem. I'll try a new clamp and if that doesn't work, try one of the hose connectors others have mentioned.
Page created in 0.084 seconds with 32 queries.