The head is supposed to be retorqued at 500 or 1000 miles I think.
......The head is supposed to be retorqued at 500 or 1000 miles I think......
Oops! I looked through the manual and re-torquing the head on a UCE is never mentioned in the maintenance schedule. Pardon my error, I've corrected the above post. I think it's accepted practice on the iron barrels to check/re-torque the head on all major services so I just did it on my UCE somewhere early on for good measure, and it didn't need any tightening at that time.Scott
Page created in 0.082 seconds with 31 queries.