[eda1bulletc5]

Hi Folks,
Can I use this 19T sprocket on a 2011 C5?
http://nfieldgear.com/enfield-store/premium-5-speed-countershaft-sprockets.html

Thanks

[motorat]

i had to call them. all the sprockets listed on the site were not for the c5.

[barenekd]

The UCE engines all take the same sprocket, but it's not the same as sthe previous models.
Nfield Gear doesn't sell motorcycle parts for the UCEs. If it's in the parts book, you have to go through your dealer. If it's an accessory item, or non-current model part, not supplied by the factory, that's what Nfield Gear sells. the dealers were complaining that the owners were going around them for parts, so the dealer wasn't making any money on parts. They lost some dealers because of that. So Nfield Gear had to stop selling parts.
Bare

[TWinOKC]

The UCE engines all take the same sprocket, but it's not the same as sthe previous models.
Nfield Gear doesn't sell motorcycle parts for the UCEs. If it's in the parts book, you have to go through your dealer. If it's an accessory item, or non-current model part, not supplied by the factory, that's what Nfield Gear sells. the dealers were complaining that the owners were going around them for parts, so the dealer wasn't making any money on parts. They lost some dealers because of that. So Nfield Gear had to stop selling parts.
Bare

It is my understanding, you can buy parts for iron barrels and AVL's from Nfield Gear just not UCE parts.  If there is not a dealer near you, you can order from any Enfield dealer, wait for the part to be shipped to the dealer and then wait (some more) for the dealer to ship the part to you.  Just takes a little patience.    

[Jack Leis]

Then there is always www.hitchcocksmotorcycles.com