Okay, newbie question coming up. I got the new cable. I screwed off the top part of the carb but am now scratching my head and staring at this cable like a deer in headlights. So, how do i take this end of the cable out of the carb? My inkling is to twist that gold plate buried inside and bend the cable so the ball end comes out from somewhere hopefully but am unsure. Thought i'd ask and search around first. And the spring seems to be locked in from the top and bottom.ThanksVishal
....remove the cable from the grip and install it.If it rotated freely then the problem must be with the cable or how it is moving the grip when it is installed.
Ended up putting the fusion tape to create some space and help with the snap back action. However, I noticed I'm still able to roll the throttle forward, beyond it's resting also. This was the case before too when everything went to hell.Looks like there's a screw in the throttle body that is near the ferrule/cable slot, that I believe prevents this roll forward action.Does anyone know here what this screw/part no is? I've looked at manuals and emailed the closest dealer (Richmond, va), but no luck. I'll be seeing them at the bike show this weekend, and i'll ask there. But curious if anybody knows here.
Page created in 0.097 seconds with 35 queries.