It is pretty much accepted that the electrical system, the wires and connectors are the weakest parts of RE. Today, the RE logo light - right below the Low Fuel Light - was not coming on. I thought that the bulb is dead. I looked at the socket, one of the wires was barely attached to the socket by a couple of naked wire strands. As I used a nose plier to carefully pull out the socket to take out bulb, the wire completely broke !
Well the bulb was all black - its filament was also gone. I need a new bulb. It is a bayonet type small bulb.
I covered the naked end of wire with tape to prevent any short circuit. I am not sure what is the best way to connect the wire to socket since there is nothing to attach it to.