Ok,
Replaced the plug with a new one for GP.
Pulled apart the carb and checked the float and needle.
Pulled off air filter.
Checked push rods adjustment.
Checked voltage. She idles at 14.5vdc and revs at 15vdc.
Here is how she acts. I can nurse it up to high RPM but if I open the throttle normally she stalls. Also the gas mist is troubling.
Sorry for the shaky cam, when she starts to spit gas on I kinda did not want it on the camera.
Thoughts?
I did change the push rod before this started. I would not think a sticky rocker would cause an this. Also the compression is higher now that I have a proper length rod. I can stand on the kicker. Could my timing be an issue?