I'm looking to disassemble a G5 or B5 fork and take some measurements, of the springs in particular. I'm talking to Rich Desmond at Sonic Springs. We've already determined a fork spring that will work for the C5 and he's adding it to their catalog. The G5 and B5 use a different fork so we can't figure out what to spec. I'd like to take one apart, take some measurements, and put it back together. It would probably take about 3 hours total and I'll refill your fork with the proper amount of 10W fork oil at my expense, or any oil of your choosing.
Any volunteers?
Thanks,
Scott