Author Topic: Military ammeter.  (Read 3647 times)

0 Members and 1 Guest are viewing this topic.

RE-Memphis

  • New Englander in Memphis
  • Scooter
  • **
  • Posts: 78
  • Karma: 0
  • Surprise, machine gun, and vanish.
on: March 05, 2013, 06:19:09 am
Ideas of where to install an ammeter.

I'm thinking ditching the fuel/engine gauge in favor of an ammeter.

Thoughts?

Ideas?

Pictures.

-IK
2012 Royal Enfield C-5 Military
2010 HD Dyna (Sold & hated it)
2008 HD Nightster (Traded with regrets)
1972 Triumph Bonneville (Still kicking myself in the arse for selling her)


gremlin

  • Grand Gearhead
  • *****
  • Posts: 1,873
  • Karma: 0
  • "Do one thing each day that scares you"
Reply #1 on: March 05, 2013, 01:07:38 pm
meh.   How about an oil-pressure gauge, or, an EGT ?  CHT ?

or, maybe an itsy bity, teeny weenie, tachometer......
« Last Edit: March 05, 2013, 06:03:51 pm by gremlin »
1996 Trophy 1200
2009 Hyosung GV250
2011 RE B5


barenekd

  • Grand Gearhead
  • *****
  • Posts: 5,516
  • Karma: 0
Reply #2 on: March 05, 2013, 05:56:48 pm
Why don't you leave the MIL light in there? It troubleshoots a whole lot more than an ammeter will!. Get out your book and learn how to use it.
Bare
2013 Moto Guzzi V7 Racer
2011 Black Classic G5 (RIP)
I refuse to tiptoe through life only to arrive safely at death
http://www.controllineplans.com


gremlin

  • Grand Gearhead
  • *****
  • Posts: 1,873
  • Karma: 0
  • "Do one thing each day that scares you"
Reply #3 on: March 05, 2013, 06:01:09 pm
For as much as the MIL tells me, I'd relocate it inside of the toolbox/electrics compartment.
1996 Trophy 1200
2009 Hyosung GV250
2011 RE B5


idk

  • Bulleteer
  • ***
  • Posts: 128
  • Karma: 0
Reply #4 on: March 06, 2013, 04:58:52 am
I was thinking of putting one in the place of the ignition switch and replacing the ignition switch with a digital keyless remote ignition system. It is not hard to do, and it is convenient and cool, but doesn't really fit with the retro style of the bike.
Ego iustus volo meus motorcycle equitare


gremlin

  • Grand Gearhead
  • *****
  • Posts: 1,873
  • Karma: 0
  • "Do one thing each day that scares you"
Reply #5 on: March 06, 2013, 02:26:08 pm
I was thinking of putting one in the place of the ignition switch and replacing the ignition switch with a digital keyless remote ignition system. It is not hard to do, and it is convenient and cool, but doesn't really fit with the retro style of the bike.

actually, a wireless tether is an awesome idea.   but, the coin batteries can get expensive.
1996 Trophy 1200
2009 Hyosung GV250
2011 RE B5


idk

  • Bulleteer
  • ***
  • Posts: 128
  • Karma: 0
Reply #6 on: March 06, 2013, 02:49:19 pm
I put one on my Trumpy two years ago and have replaced the battery once, a couple of months ago. It was only a couple of dollars.

I used a remote switch (that is generally used to trigger fancy LED lights on Hardly Drivables) to trigger a relay which connects the ignition circuit. The digital remote and the relay came out to under $30, so it is cheap and easy - which I like.

A unit such as this one wouldn't even need a relay.
http://www.ebay.com/itm/CYRON-MOTORCYCLE-12-V-ON-OFF-REMOTE-CONTROL-4-LED-LIGHT-/140875099271?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item20cccf6c87
Ego iustus volo meus motorcycle equitare


gremlin

  • Grand Gearhead
  • *****
  • Posts: 1,873
  • Karma: 0
  • "Do one thing each day that scares you"
Reply #7 on: March 06, 2013, 04:22:36 pm
I see, that one is an ON/OFF manually activated remote.

I was thinking of a low power transponder that automatically detects when you are within 6 foot of your bike, and, turns on the ignition.

walk up, give it a kick, drive off ...   fall off & the ignition cuts out.
1996 Trophy 1200
2009 Hyosung GV250
2011 RE B5


idk

  • Bulleteer
  • ***
  • Posts: 128
  • Karma: 0
Reply #8 on: March 06, 2013, 04:37:27 pm
That can work as well. My only concern would be that if the signal were lost then the bike would cut off when you were riding it.

But, now would be a good time to return to the OP's question.  ;)
Ego iustus volo meus motorcycle equitare


High On Octane

  • Grand Gearhead
  • *****
  • Posts: 6,075
  • Karma: 0
Reply #9 on: March 06, 2013, 04:45:17 pm
That is really cool and trick!  I might get one those for my Indian.  I don't have any kind of key or theft deterrent on the bike at all.  I like how it's very small and easy to hide.  The 100' range is pretty nice as well.
2001 Harley Davidson Road King


gremlin

  • Grand Gearhead
  • *****
  • Posts: 1,873
  • Karma: 0
  • "Do one thing each day that scares you"
Reply #10 on: March 06, 2013, 06:47:48 pm
I wonder ....  do we know what diameter gauge will fit ?
1996 Trophy 1200
2009 Hyosung GV250
2011 RE B5


coinzy

  • Scooter
  • **
  • Posts: 63
  • Karma: 0
Reply #11 on: March 08, 2013, 07:57:22 pm
You want retro,go the whole hog 8).This is what RE did back in '48
 


RE-Memphis

  • New Englander in Memphis
  • Scooter
  • **
  • Posts: 78
  • Karma: 0
  • Surprise, machine gun, and vanish.
Reply #12 on: March 09, 2013, 02:22:08 pm
I think the hijacked thread was more fun then anything. Now I know who to touch base base with for anything remote start.

My motivation for a anmeter guage is less practical and more aesthetics. I like the look of anmeter. 

The last picture is awesome. Love it.

Ijpe
2012 Royal Enfield C-5 Military
2010 HD Dyna (Sold & hated it)
2008 HD Nightster (Traded with regrets)
1972 Triumph Bonneville (Still kicking myself in the arse for selling her)


RE-Memphis

  • New Englander in Memphis
  • Scooter
  • **
  • Posts: 78
  • Karma: 0
  • Surprise, machine gun, and vanish.
Reply #13 on: March 09, 2013, 02:47:30 pm
... And I appear to have taught my iPad to misspell ammeter.  :(
2012 Royal Enfield C-5 Military
2010 HD Dyna (Sold & hated it)
2008 HD Nightster (Traded with regrets)
1972 Triumph Bonneville (Still kicking myself in the arse for selling her)