HPRE

Menu

Members Rides

Test ride new C5 at Chennai RE factory


in
Members Rides

NField Gear

Welcome, Guest. Please login or register.
Did you miss your activation email?
February 11, 2016, 07:25:35 am

Login with username, password and session length

 

Author Topic: side covers/tool boxes  (Read 1722 times)

the_roadking

  • Neophyte
  • *
  • Posts: 35
  • Karma: 0
side covers/tool boxes
« on: March 26, 2008, 10:43:24 am »
I really dislike the Electra side covers.
Is it posible to install the tool boxes of the Classic models?
I would like to give it a more antique look. The stock bike looks too modern  :-\
« Last Edit: March 26, 2008, 05:32:22 pm by the_roadking »

HRAB

  • I should really edit this
  • Grease Monkey
  • ****
  • Posts: 387
  • Karma: 1
  • Been there, doin' more...God willing
Re: side covers/tool boxes
« Reply #1 on: March 26, 2008, 03:39:52 pm »
The Classic style tool boxes can be made to fit. The drilling in the boxes does not match the tabs on the Electra frame, but a little work with a step drill will fix that. The existing holes could be plugged with the rubber grommet style plugs found at most auto parts stores.

Contact our host for specifics: new or slightly flawed for a bargain price and color.
customerservice@enfieldmotorcycles.com or  800 201 7472
jim
BMWMOA www.bmwmoa.com
Iron Butt Association www.ironbutt.com/about/default.cfm
(Formerly) CRA# 118N www.cra-mn.com (I got smarter in old age)
74 Honda XL350 'Scoot'
81 Honda CB650C
86 Gold Wing with California Sidecar
00 Honda ST1100 'Large Marge'