Members Rides

Close Up Of UCE Silencer

Members Rides

NField Gear

Welcome, Guest. Please login or register.
Did you miss your activation email?
May 24, 2016, 04:37:45 pm

Login with username, password and session length


Author Topic: new question  (Read 1375 times)

Dave C

  • Neophyte
  • *
  • Posts: 6
  • Karma: 0
new question
« on: March 12, 2008, 09:27:13 pm »
Does anyone make an after-market hard tail frame?
I never gamble when I cheat at cards


  • Grease Monkey
  • ****
  • Posts: 456
  • Karma: 0
Re: new question
« Reply #1 on: March 13, 2008, 12:16:08 am »
I don't know, but a few people in various for(u)ms have tossed around the idea.

One suggestion I saw was to replace the rear shocks with solid struts. This would approximate the "feel" of a hardtail and let one know if they wanted to pursue the matter further. I have seen a few pictures of RE "Bobbers". It is a cool look, but might it not reduce the RE's versatility for varied road surfaces?

If I had the time (and money) it would be entertaining to pursue.

-Jesse, who feels the stock RE suspension is pretty hard already.
"Ennie" 2006 RE Bullet Classic 500
Commuter Scooter Commuted to "Otherside"
"Geezer" 2007 Moto Guzzi Breva 750 died and reborn as...
Yet, un-named, 2005 Moto Guzzi Breva 750


  • Grand Gearhead
  • *****
  • Posts: 646
  • Karma: 0
Re: new question
« Reply #2 on: March 13, 2008, 09:39:23 am »
Steel Thunder Custom Cycles (www.steelthundercc.com) sells weld on and bolt on hardtail conversions for the Harley Sportster.

I bet that a good fabricator could adapt it for the RE frame.
Endeavor To Persevere


  • I should really edit this
  • Grease Monkey
  • ****
  • Posts: 387
  • Karma: 1
  • Been there, doin' more...God willing
Re: new question
« Reply #3 on: March 13, 2008, 10:03:44 am »
There are three people that I know of who are persuing this project at this time.
As far as I know, none of them have an inventory of these, they would need to be ordered and custom built. These frames start as salvaged RE frames and most mounting tabs are removed to clean them up before adding the hard tail. You may need to replace those tabs you would chose to have. ie air box, battery carrier, fork lock, etc.

E-mail me if you would like some numbers and I will see if they wish to be contacted.
BMWMOA www.bmwmoa.com
Iron Butt Association www.ironbutt.com/about/default.cfm
(Formerly) CRA# 118N www.cra-mn.com (I got smarter in old age)
74 Honda XL350 'Scoot'
81 Honda CB650C
86 Gold Wing with California Sidecar
00 Honda ST1100 'Large Marge'


  • Grease Monkey
  • ****
  • Posts: 459
  • Karma: 0
  • REA #64 ...not quite done, but close...
Re: new question
« Reply #4 on: March 17, 2008, 12:02:58 pm »
I was planning on hardtailing my Bobber project, but my chopper building friend who was going to build my hardtail  got selected to build a S&S Bike.  Now I'm back to a swingarm until I can find something suitable.  HRAB, I am interested in talking to anyone that may be building a hardtail if possible.