Just got the kit in and I figured with my college education I should easily be able
to put it together in no time. Boy did I feel dumb. After an hour of failing I did a search
on this forum. Thanks to Tanker and his post back in 2008 and a couple hours of
messing with those W clips I got it done. Here is a link to his post:
http://www.enfieldmotorcycles.com/forum/index.php?topic=3210.0I forgot to mention that there are no instructions whats so ever included with the kit.
Most important is that the W clip ends go into the front rim beveled edge with the
help of needle nose pliers. So you first grab the front ring, insert headlight lens and then the W clips go in. Then the inner ring goes in to a slot and gets screwed in with a screw and metal clip on opposite of the slot. I also marked the places where the W clips touch the inner ring and went back and bent back the ridge on inner ring just a bit so there is enough room to connect the two rings.
Next step is to attach it to the bike. It is way too hot right now in Chicago. Almost hit 100 degrees today and it's humid. It is still better than the winter we just had.
Ryan