There seems to be a join where that bolt goes back from the insignia plate. Should be the same on both sides. I've just checked mine and it looks similar.Unless we're both cracking up.......
Singh Ji,There is a split in booth the lower part of the t stem where the pinch bolt holds the fork but your looks a bit slanted, anyways if there is only one split on each side of the stem then all is well with your G5.
My 2009 Military G5 does not have those lines on either side. Check and see if there is paint over the crack.
I will be very surprised if your G5 don't have them.
Singh, totally normal. That's where the triple tree splits to let the fork leg in. The cracks on both sides may look a little different but nothing to be worried about.If you'd like to make sure they're not a problem just put the bike on the center stand, loosen both sides, wiggle the front end a little, and retorque them to 24 ft. lbs. The fork can get twisted and it can affect handling. If you really want to go whole hog loosen the axle too and bounce the front end a few times while it's all loose. This lets everything center without and pressure.Scott
Page created in 0.09 seconds with 33 queries.