Author Topic: Completed 1968 1/2 MK1A TT7  (Read 1626 times)

0 Members and 1 Guest are viewing this topic.

RAP

  • Scooter
  • **
  • Posts: 25
  • Karma: 0
on: June 05, 2011, 01:25:46 pm
Some may remember answering questions regarding parts and information, several months ago for a vintage Enfield project that Dad had begun. Many wanted to see photos. Here is the completed machine.

Thank you to all who assisted with this 
.


Ragmas

  • Grease Monkey
  • ****
  • Posts: 358
  • Karma: 0
Reply #1 on: June 05, 2011, 02:19:51 pm
Very nice bike.  Well done.  One question.  What is the doohickey that looks like a heat sink above the rear foot peg?

Samgar
2009 G-5 Military
Little Falls, NY


RAP

  • Scooter
  • **
  • Posts: 25
  • Karma: 0
Reply #2 on: June 05, 2011, 03:33:32 pm
Believe the Doohickey to be the horn   :-[

Still not quite done but wanted it to be completed for Rhinebeck. Effort was made to keep original rather than do full restoration. Many things still to do.


t120rbullet

  • Grand Gearhead
  • *****
  • Posts: 1,967
  • Karma: 0
Reply #3 on: June 05, 2011, 05:22:00 pm
Good job, great looking bike.

The "Doohickey" is a heat sink for the zener diode.
CJ
1972 FLH "Sambo"
1999 Enfield 500 Black Deluxe "Silver"
2023 Guzzi V7 Special "BOB"