Home
Search
Calendar
Login
Register
Login
Register
Link 1
Link 2
Link 3
Link 4
Link 5
Unofficial Royal Enfield Community Forum
Royal Enfield Motorcycles
Bullet with the UCE engine
Intake diameter
Login
|
Register
HITCHCOCKS SUPER BLACK FRIDAY EVENT
22nd NOVEMBER UNTIL MIDNIGHT 26th NOVEMBER UK TIME
SHOP NOW
10% OFF
EVERYTHING
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Intake diameter (Read 1828 times)
0 Members and 1 Guest are viewing this topic.
Sub
Bob's Your Uncle
Grease Monkey
Posts: 435
Karma: 0
2010 Black Bullet C5
Intake diameter
on:
June 02, 2011, 04:01:22 pm
I thought it was posted on here somewhere, but I cant find it. What is the diameter (outside and inside if you know it) of the tube that goes into the intake manifold? Is it 1.75" ? My bike is at the dealer at the moment so I cant check.
Logged
barenekd
Grand Gearhead
Posts: 5,516
Karma: 0
Re: Intake diameter
Reply #1 on:
June 02, 2011, 04:51:49 pm
The OD is about 1-5/8". Can't confirm the ID. I couldn't find that printed anywhere. The old carbs were 1-3/16"
Bare
Logged
2013 Moto Guzzi V7 Racer
2011 Black Classic G5 (RIP)
I refuse to tiptoe through life only to arrive safely at death
http://www.controllineplans.com
Ducati Scotty
Grand Gearhead
Posts: 7,038
Karma: 0
2010 Teal C5
Re: Intake diameter
Reply #2 on:
June 02, 2011, 06:21:28 pm
46mm outside diameter on the throttle body:
http://www.enfieldmotorcycles.com/forum/index.php/topic,7099.msg98726.html#msg98726
Scott
Logged
Sub
Bob's Your Uncle
Grease Monkey
Posts: 435
Karma: 0
2010 Black Bullet C5
Re: Intake diameter
Reply #3 on:
June 02, 2011, 06:56:16 pm
Ah, ok thanks guys. Maybe I'll average the two #'s!
(1 5/8" = 41.275 mm)
Logged
Ducati Scotty
Grand Gearhead
Posts: 7,038
Karma: 0
2010 Teal C5
Re: Intake diameter
Reply #4 on:
June 02, 2011, 07:30:42 pm
I measured mine with a caliper and the 48mm filter I got fit with about 2mm extra space. I think the original poster in that thread got the 46mm K&N filter and it fit snugly.
Scott
Logged
Sub
Bob's Your Uncle
Grease Monkey
Posts: 435
Karma: 0
2010 Black Bullet C5
Re: Intake diameter
Reply #5 on:
June 02, 2011, 08:25:26 pm
Ah, ok perfect.Thanks Scott.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Unofficial Royal Enfield Community Forum
Royal Enfield Motorcycles
Bullet with the UCE engine
Intake diameter
Login
Welcome,
Guest
. Please
login
or
register
.
Have you missed your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length.