[r80rt]

Yeah, they did a good job, it may be semi modern but it's still a simple one lunger!, I changed the gear during a oil change, didn't take a lot longer than normal

[singhg5]

........... make sure you put the new gear in the right way.  

What is this 'right' way of plastic gear ?  Can you elaborate if the two sides of plastic gear are different ?

[r80rt]

The gear will go on either way, but there is a boss on one side that faces out. Mark the gear on your bike with a sharpie before you remove it, then you can compare the new one and make sure the proper side is facing out. you'll need a snap ring tool but nothing more exotic than that. Any parts store should have the tool.

[singhg5]

The gear will go on either way, but there is a boss on one side that faces out. Mark the gear on your bike with a sharpie before you remove it, then you can compare the new one and make sure the proper side is facing out. you'll need a snap ring tool but nothing more exotic than that. Any parts store should have the tool.

Great !

[gashousegorilla]

 Great  work Singh.....your really testing that motor, no major issues correct ?
 I can see another video in the works with that gear change