Members Rides

RE+Trailer_3(fog light)

Members Rides

NField Gear

45 Guests, 3 Users
Scotty Brown, Ice, pornoheft
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2015, 12:34:22 am

Login with username, password and session length


Author Topic: lowering a solo seat  (Read 831 times)

white bullet 500

  • Neophyte
  • *
  • Posts: 3
  • Karma: 0
lowering a solo seat
« on: April 19, 2011, 07:38:55 am »
hi - i have a 2003 bullet 500 with a solo spring style seat. the springs are short (2" i think) and the front of the seat is too high. i see plenty of pics of seats that are lowered in the front and have read that you have to cut the front bracket down to do this. there is a large wiring harness running though the the seat bracket and it does not look like this will allow the seat to be lowered. what do i do about this ? i have seen pics of this wiring harness under the frame .............. how hard is it to relocate or reroute ? thanks for the help..........


  • Bulleteer
  • ***
  • Posts: 174
  • Karma: 1
  • Low as it can go
Re: lowering a solo seat
« Reply #1 on: June 24, 2011, 05:33:14 pm »
I got a classic solo seat and 2" springs and it wasnt low enough so I cut off the bracket with a hacksaw believe it or not and put the seat down on rhe bracket with no springs at all.
Dr B